LES PAUL & sg Style Wiring harnesses
By far our most popular wiring harness. Drops right in to genuine Gibson guitars without any modifications. Fits many import guitars* including Epiphone, Ibanez, Prestige, Sparrow, Vintage, MRW, El Degas and others.
*Note: many import guitars will require that the metric holes for the Volume and Tone controls be enlarged to accommodate the 3/8" USA CTS pot shafts. Also, some guitars may require long-shaft pots depending on the thickness of the wood cap. We now offer kits made with CTS M8 metric pots so you don’t have to drill out the holes - and because they have a coarse spline knurl, you can continue to use your stock 18-spline knobs.
We also offer “medium” shaft (1/2”) CTS pots that are half way between the 3/8” short shaft pots, and the 3/4” long shaft pots. These can easily be adjusted to standard 3/8” short shaft length with a 1/8” nut on the inside.
Les Paul CTS Wiring Harness
Our most popular wiring harness, made with CTS short-shaft 500K Volume and Tone pots, Orange Drop .022uf tone capacitors and Switchcraft output jack.
CTS short shaft pots available in 3/8” SAE for domestic guitars (i.e. Gibson), and M8 Metric which is ideal for import guitars - namely Epiphone.
Available in 50's Vintage (default) and Modern wiring configurations. Optional independent Volume wiring available on request.
$75 + S&H
Add $35 for prewired* nickel Switchcraft 3-way toggle switch
Add $20 to upgrade to gold Switchcraft 3-way toggle switch, and $10 to upgrade to gold Switchcraft output jack.Add $10 for long-shaft pots.
$50 deposit required for custom orders.
* NOTE: 3-way toggle switches are prewired using 4-conductor PVC wiring. Add $10 for 3 X 18" lengths of braided shield wiring.
*** NEW!!! You don’t have to cut off your Gibson QuickConnect ends anymore and hardwire your pickups to the pots! Add $25 for female QuickConnect leads, wired directly to the above pots.
Les Paul cts Push/Pull
A twist on our standard Les Paul wiring harness, but with Bourns or CTS 500K (shown here) audio taper push/pull Volume pots for coil-splitting 4-conductor humbucker pickups. Includes new Switchcraft output jack
Available in 50's Vintage (default) and Modern wiring configurations. Optional independent Volume wiring available on request.
$85 + S&H
Add $35 for prewired* nickel Switchcraft 3-way toggle switch ($45 for a gold one)
Add $10 for long-shaft pots.
$50 deposit required for custom orders.
* NOTE: 3-way toggle switches are prewired using 4-conductor PVC wiring. Add $10 for 3 X 18" lengths of braided shield wiring.
*** NEW!!! You don’t have to cut off your Gibson QuickConnect ends anymore and hardwire your pickups to the pots! Add $25 for female QuickConnect leads, wired directly to the above pots.
SG CTS Wiring Harness
Fully assembled SG wiring harness made with CTS short-shaft 500K Volume and Tone pots, Orange Drop .022uf tone capacitors, Switchcraft angled 3-way toggle switch & output jack, vintage cloth and braided shield wiring.+
CTS short shaft pots available in 3/8” SAE for domestic guitars (i.e. Gibson), and M8 Metric which is ideal for import guitars - namely Epiphone.
Available in 50's Vintage (default) and Modern wiring configurations. Optional independent Volume wiring available on request.
$120 + S&H